Dell Projector OSD Simulator

Dell Projector OSD Simulator

製作軟體:
photoshop, flash,action script
………………………….……….……….……….……….

Using the Control Panel

1 Power
Turns the projector on or off.

2 IR Receiver
Point the remote control towards the IR receiverand press a button.

3 LAMP warning light
If the LAMP amber indicator is on or blinking,one of the following problems could be occurring:
• Lamp is reaching its end of usable life
• Lamp module is not properly installed
• Lamp driver failure
• Color wheel failure

4 TEMP warning light
If the TEMP amber indicator is on or blinking,one of the following problems could be occurring:
• Internal temperature of the projector is too high
• Color wheel failure

5 Up / Keystone adjustment
Press to navigate through the On-Screen Display(OSD) Menu items.
Press to adjust image distortion caused by tilting the projector (+40/-35 degrees).

6 Volume up
Press to increase the volume.

7 Right / Auto Adjust
Press to navigate through the On-Screen Display(OSD) Menu items.
Press to synchronize the projector to the input source.

8 Volume down
Press to decrease the volume.

9 Enter
Press to confirm the selection item.

10 Down / Keystone adjustment
Press to navigate through the On-Screen Display(OSD) Menu items.
Press to adjust image distortion caused by tilting the projector (+40/-35 degrees).

11 Menu
Press to activate the OSD. Use the directional keys and the Menu button to navigate through the OSD.

12 Left / Source
Press to navigate through the On-Screen Display(OSD) Menu items.
Press to toggle through Analog RGB, Composite,Component (YPbPr via VGA), and S-video sources when multiple sources are connected to the projector.

Comments are closed.